HTX-252 MANUAL PDF
FYI, If you decide to attempt any modifications to your HTX, you are doing so at your own risk. HTX Owners Manual HTX/Albrecht AE Service. Update*** I’m still doing this repair for those who may need it. Here are the specifics. I charge a flat fee of $35 which includes the new mic cord, the. Cat. No. OWNER’S MANUAL HTX TWO-METER MOBILE TRANSCEIVER Please read before using this transceiver. INTRODUCTION Your .
|Published (Last):||27 November 2012|
|PDF File Size:||7.22 Mb|
|ePub File Size:||15.8 Mb|
|Price:||Free* [*Free Regsitration Required]|
The default is 20 kHz. For exam- ple, if you have set the transceiver to htx2-52 operation on Turning the Keytone Beep On and Off.
The power setting is saved when you store settings in memory. Specifica- tions jtx-252 subject to change and improvement without notice.
This special tone lets you listen only to oth- er transceivers set to the same tone frequency when you use the transceiver in simplex operation. If it gets wet, wipe it dry immediately.
Radio Shack HTX-252 Owner’s Manual
Scanning for a Frequency 1. For example, to enter I had to replace the microphone cable if I wanted to continue to use the radio.
Be sure LOCK on the microphone is set to its leftmost position. To turn off auto-reply, set the option to oFF in Step 4. High 45 Watt and Low 10 Watt Power Settings—let you select the best power setting for effective communications.
Clearing a Memory Channel You can clear any memory channel manua Memory Channel 1 and the calling-frequency memory.
I just thought it would be easier for some folks. Page 8 Start studying for the license exams. DTMF Memories 1—10 hold 15 digits each. Then, while holding down Ntx-252, press the digits on the microphone to transmit the tones.
DTMF Memory 0 holds 7 digits. All display elements stay on for about 1 second.
This procedure clears all stored information. This setting affects only the VFO mode.
Index of /k/kb1uif/downloads/Service & User Manuals/Radio Shack/HTX-252
Using an outdated browser makes your computer unsafe. Mine were yellow, yours might not be. The transceiver begins to scan up or down SCAN the full frequency range.
This is what the microphone looks like on the inside. The HTX recalls all settings saved in the callingfrequency memory.
Radio Shack HTX Manuals
If you saved a re- peater offset in a memory, that setting is not affected. Nanual the Subaudible Tones. Extending the Transmit Frequency Range. Each has its own benefits, Choose the one best suited to your particular needs.
To return to low power, press LOW again. If auto-reply is off, you can release PTT after you enter the first digit. Then route the antenna cable from the antenna to the HTX and connect it to the antenna connector. This gives users of low-power transceivers the ability to communicate over a much greater range.
Before you reset the transceiv- er, try turning it off then on again to see if it begins working prop- erly.
LOCK appears on the display.